dolibarr/htdocs/langs/en_US/mails.lang

# Dolibarr language file - Source file is en_US - mails
Mailing=EMailing
EMailing=EMailing
EMailings=Mass EMails
SMSings=SMSings
AllEMailings=All mass eMails
MailCard=EMailing card
MailRecipients=Recipients
MailRecipient=Recipient
MailTitle=Label
MailFrom=From
ForceEmailFrom=Default email From
PhoneFrom=From
MailErrorsTo=Errors to
MailReply=Reply to
MailTo=To
MailToUsers=To user(s)
MailCC=Copy to
MailToCCUsers=Copy to users(s)
MailCCC=Cached copy to
MailTopic=Email subject
MailDate=Email date
MailReferences=Message IDs in References
MailText=Message
MailFile=Attached files
MailMessage=Email body
SubjectNotIn=Not in Subject
BodyNotIn=Not in Body
ShowEMailing=Show mass Email
ListOfEMailings=List of mass Email
NewMailing=New mass Email
NewSMSing=New smsing
EditMailing=Edit mass Email
ResetMailing=Resend mass Email
ConfirmResetMailingTargetMassaction=Confirmation of the reset of targets status in error
ResetMailingTargetMassaction=Reset status in error
DeleteMailing=Delete mass Email
PreviewMailing=Preview mass Email
CreateMailing=Create mass Email
TestMailing=Test
ValidMailing=Valid mass Email
MailingStatusDraft=Draft
MailingStatusValidated=Validated
MailingStatusSent=Sent
MailingStatusSentPartialy=Sent partially
MailingStatusSentCompletely=Sent completely
MailingStatusError=Error
MailingStatusNotSent=Not sent
MailSuccessfulySent=Email (from %s to %s) successfully accepted for delivery
MailingSuccessfullyValidated=EMailing successfully validated
MailUnsubcribe=Unsubscribe
MailingStatusNotContact=Don't contact anymore
MailingStatusReadAndUnsubscribe=Read and unsubscribe
ErrorMailRecipientIsEmpty=Email recipient is empty
WarningNoEMailsAdded=No new Email to add to recipient's list.
ConfirmValidMailing=Are you sure you want to validate this emailing?
ConfirmResetMailing=Warning, by re-initializing emailing <b>%s</b>, you will allow the re-sending this email in a bulk mailing. Are you sure you want to do this?
ConfirmResetMailingTargetMassactionQuestion=Are you sure you want to reset the status of the selected recipients (this may means that email will be resent if you use the Send email feature of the emailing) ?
ConfirmDeleteMailing=Are you sure you want to delete this emailing?
NbOfUniqueEMails=No. of unique emails
NbOfUniquePhones=No. of unique phones
NbOfEMails=No. of EMails
TotalNbOfDistinctRecipients=Number of distinct recipients
NoTargetYet=No recipients defined yet (Go on tab 'Recipients')
NoRecipientEmail=No recipient email for %s
RemoveRecipient=Remove recipient
YouCanAddYourOwnPredefindedListHere=To create your email selector module, see htdocs/core/modules/mailings/README.
EMailTestSubstitutionReplacedByGenericValues=When using test mode, substitutions variables are replaced by generic values
MailingAddFile=Attach this file
NoAttachedFiles=No attached files
BadEMail=Bad value for Email
EMailNotDefined=Email not defined
ConfirmCloneEMailing=Are you sure you want to clone this emailing?
CloneContent=Clone message
CloneReceivers=Cloner recipients
DateLastSend=Date of latest sending
DateSending=Date sending
LastSending=Last sending
SentTo=Sent to <b>%s</b>
MailingStatusRead=Read
YourMailUnsubcribeOK=The email <b>%s</b>  is correctly unsubscribe from mailing list
ActivateCheckReadKey=Key used to encrypt URL used for "Read Receipt" and "Unsubscribe" feature
EMailSentToNRecipients=Email sent to %s recipients.
EMailSentForNElements=Email sent for %s elements.
XTargetsAdded=<b>%s</b> recipients added into target list
OnlyPDFattachmentSupported=If the PDF documents were already generated for the objects to send, they will be attached to email. If not, no email will be sent (also, note that only pdf documents are supported as attachments in mass sending in this version).
AllRecipientSelected=The recipients of the %s record selected (if their email is known).
GroupEmails=Group emails
OneEmailPerRecipient=One email per recipient (by default, one email per record selected)
WarningIfYouCheckOneRecipientPerEmail=Warning, if you check this box, it means only one email will be sent for several different record selected, so, if your message contains substitution variables that refers to data of a record, it becomes not possible to replace them.
ResultOfMailSending=Result of mass Email sending
NbSelected=Number selected
NbIgnored=Number ignored
NbSent=Number sent
SentXXXmessages=%s message(s) sent.
ConfirmUnvalidateEmailing=Are you sure you want to change email <b>%s</b> to draft status?
MailingModuleDescContactsWithThirdpartyFilter=Contact with customer filters
MailingModuleDescContactsByCompanyCategory=Contacts by third-party category
MailingModuleDescContactsByCategory=Contacts by categories
MailingModuleDescContactsByFunction=Contacts by position
MailingModuleDescEmailsFromFile=Emails from file
MailingModuleDescEmailsFromUser=Emails input by user
MailingModuleDescDolibarrUsers=Users with Emails
MailingModuleDescThirdPartiesByCategories=Third parties
SendingFromWebInterfaceIsNotAllowed=Sending from web interface is not allowed.
EmailCollectorFilterDesc=All filters must match to have an email being collected.<br>You can use the character "!" before the search string value if you need a negative test

# Libelle des modules de liste de destinataires mailing
LineInFile=Line %s in file
RecipientSelectionModules=Defined requests for recipient's selection
MailSelectedRecipients=Selected recipients
MailingArea=Mass Emails
LastMailings=Latest %s mass emails
TargetsStatistics=Targets statistics
NbOfCompaniesContacts=Unique contacts/addresses
MailNoChangePossible=Recipients for validated emailing can't be changed
SearchAMailing=Search a mass Email
SendMailing=Send mass Email
SentBy=Sent by
AdvancedAlternative=Advanced alternative
MailingNeedCommand=Sending an emailing can be performed from command line. Ask your server administrator to launch the following command to send the emailing to all recipients:
MailingNeedCommand2=You can however send them online by adding parameter MAILING_LIMIT_SENDBYWEB with value of max number of emails you want to send by session. For this, go on Home - Setup - Other.
ConfirmSendingEmailing=If you want to send emailing directly from this screen, please confirm you are sure you want to send emailing now from your browser ?
LimitSendingEmailing=Note: Sending of a mass email from web interface is done in several times for security and timeout reasons, <b>%s</b> recipients at a time for each sending session.
TargetsReset=Clear list
ToClearAllRecipientsClickHere=Click here to clear the recipient list for this emailing
ToAddRecipientsChooseHere=Add recipients by choosing from the lists
NbOfEMailingsReceived=Mass emails received
NbOfEMailingsSend=Mass emails sent
IdRecord=ID record
DeliveryReceipt=Delivery Ack.
YouCanUseCommaSeparatorForSeveralRecipients=You can use the <b>comma</b> separator to specify several recipients.
TagCheckMail=Invisible link to track mail opening
TagUnsubscribe=Unsubscribe link
TagSignature=Signature of sending user
EMailRecipient=Recipient Email
TagMailtoEmail=Recipient Email (including html "mailto:" link)
NoEmailSentBadSenderOrRecipientEmail=No email sent. Bad sender or recipient email. Verify user profile.
# Module Notifications
Notifications=Notifications
NotificationsAuto=Notifications Auto.
NoNotificationsWillBeSent=No automatic email notifications are planned for this event type and company
ANotificationsWillBeSent=1 automatic notification will be sent by email
SomeNotificationsWillBeSent=%s automatic notifications will be sent by email
AddNewNotification=Subscribe to a new automatic email notification (target/event)
ListOfActiveNotifications=Active subscriptions
ListOfActiveNotificationsHelp=List of couple %s/%s subscribed for automatic email notification
ListOfNotificationsDone=Automatic email notifications sent
ListOfNotificationsDoneHelp=List of past email notifications sent
MailSendSetupIs=Configuration of email sending has been setup to '%s'. This mode can't be used to send mass emailing.
MailSendSetupIs2=You must first go, with an admin account, into menu %sHome - Setup - EMails%s to change parameter <strong>'%s'</strong> to use mode '%s'. With this mode, you can enter setup of the SMTP server provided by your Internet Service Provider and use Mass emailing feature.
MailSendSetupIs3=If you have any questions on how to setup your SMTP server, you can ask to %s.
YouCanAlsoUseSupervisorKeyword=You can also add the keyword <strong>__SUPERVISOREMAIL__</strong> to have email being sent to the supervisor of user (works only if an email is defined for this supervisor)
NbOfTargetedContacts=Current number of targeted contact emails
UseFormatFileEmailToTarget=Imported file must have format <strong>email;name;firstname;other</strong>
UseFormatInputEmailToTarget=Enter a string with format <strong>email;name;firstname;other</strong>
MailAdvTargetRecipients=Recipients (advanced selection)
AdvTgtTitle=Fill input fields to preselect the third parties or contacts/addresses to target
AdvTgtSearchTextHelp=Use %% as wildcards. For example to find all item like <b>jean, joe, jim</b>, you can input <b>j%%</b>, you can also use ; as separator for value, and use ! for except this value. For example  <b>jean;joe;jim%%;!jimo;!jima%%</b> will target all jean, joe, start with jim but not jimo and not everything that starts with jima
AdvTgtSearchIntHelp=Use interval to select int or float value
AdvTgtMinVal=Minimum value
AdvTgtMaxVal=Maximum value
AdvTgtSearchDtHelp=Use interval to select date value
AdvTgtStartDt=Start dt.
AdvTgtEndDt=End dt.
AdvTgtTypeOfIncudeHelp=Target Email of third party and email of contact of the third party, or just third-party email or just contact email
AdvTgtTypeOfIncude=Type of targeted email
AdvTgtContactHelp=Use only if you target contact into "Type of targeted email"
AddAll=Add all
RemoveAll=Remove all
ItemsCount=Item(s)
AdvTgtNameTemplate=Filter name
AdvTgtAddContact=Add emails according to criteria
AdvTgtLoadFilter=Load filter
AdvTgtDeleteFilter=Delete filter
AdvTgtSaveFilter=Update filter
AdvTgtCreateFilter=Create filter
AdvTgtOrCreateNewFilter=Name of new filter
NoContactWithCategoryFound=No category found linked to some contacts/addresses
NoContactLinkedToThirdpartieWithCategoryFound=No category found linked to some thirdparties
OutGoingEmailSetup=Outgoing emails
InGoingEmailSetup=Incoming emails
OutGoingEmailSetupForEmailing=Outgoing emails (%s)
DefaultOutgoingEmailSetup=Same configuration than the global Outgoing email setup
Information=Information
ContactsWithThirdpartyFilter=Contacts with third-party filter
Unanswered=Unanswered
Answered=Answered
IsNotAnAnswer=Is not answer (Is an initial email)
IsAnAnswer=Is an answer of an initial email
RecordCreatedByEmailCollector=Record created by the Email Collector %s
DefaultBlacklistMailingStatus=Default value for field '%s' when creating a new contact
DefaultStatusEmptyMandatory=Empty but mandatory
WarningLimitSendByDay=WARNING: The setup or contract of your instance limits your number of emails per day to <b>%s</b>. Trying to send more may result in having your instance slow down or suspended. Please contact your support if you need a higher quota.
NoMoreRecipientToSendTo=No more recipient to send the email to
EmailOptedOut=Email owner has requested to not contact him with this email anymore
EvenUnsubscribe=Include opt-out emails
EvenUnsubscribeDesc=Include opt-out emails when you select emails as targets. Useful for mandatory service emails for example.
XEmailsDoneYActionsDone=%s emails pre-qualified, %s emails successfully processed (for %s operations done)
YouCanMakeSomeInstructionForEmail=You can make some instructions for your Email (Example: generate image in email template...)
ModelTemplate=Email template
YouCanChooseAModelForYouMailContent= You can choose one of template models or generate one with AI
TitleOfMailHolder=Title of the e-mail goes here
ContentOfMailHolder=Content of email goes here...
LastNews=Latest News
ListProducts= List of products
PasswordReset=Password reset
MailingNumberOfEmailsPerBatch=Number of emails per batch
MailingNumberOfEmailsPerBatchHelp=Define the number of emails you want to send for each manual sending action. Warning: An important number of emails can lead to your server being blacklisted.
SelectSomeArticlesOrEnterYourOwnContent=Select your articles or enter your own text...
SelectOneArticleOrEnterYourOwnContent=Select one product or service or enter your own text...